HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Free Full Text (PDF) Free Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (4) Citing Articles via Google Scholar Google Scholar Articles by Velea, D. Articles by Sabatier, J. M. Search for Related Content PubMed Articles by Velea, D. Articles by Sabatier, J. M. GeoRef GeoRef Citation Agricola Articles by Velea, D. Articles by Sabatier, J. M.

DIVISION S-1-SOIL PHYSICS

Elastic Wave Velocities in Partially Saturated Ottawa Sand

Experimental Results and Modeling

National Center for Physical Acoustics, Univ. of Mississippi, Coliseum Drive, University, MS 38677 USA

dvelea{at}olemiss.edu

A theoretical model is needed to predict the macroscopic mechanical properties of soil from the size, shape, and elastic properties of its constituent particles. To test one such model, we compared measured and calculated values of compressional and shear wave velocities in Ottawa sand. The sand was packed in a cylindrical tank 0.9 m in diameter and 0.9 m deep. The velocities were measured in the horizontal direction as a function of depth as the zero tension level of the water in the sand was slowly raised. In the air-dry sand the velocities varied nonuniformly with depth, reaching a maximum value about two-thirds of the way to the bottom of the tank. When water was introduced into the bottom of the sand, the nonuniform depth dependence was removed. At higher saturations, the velocities gradually decreased until the zero tension level was at the top of the sand. The nonuniform depth dependence in the dry sand has been attributed to the tank wall supporting part of the gravitational stress in the material. A modified Digby (1981) model was found to adequately account for the results in the wet material. A lumped parameter combining the contacts per grain, size, and the grain roughness was used to fit the data. In terms of the model, it is concluded that the water in the contacts between the grains had little effect on the normal contact stiffness, but reduced the tangential contact stiffness to zero.

Abbreviations: TDR, time domain reflectometry

This article has been cited by other articles:

				M. L. Oelze, W. D. O'Brien Jr., and R. G. Darmody Measurement of Attenuation and Speed of Sound in Soils Soil Sci. Soc. Am. J., May 1, 2002; 66(3): 788 - 796. [Abstract] [Full Text] [PDF]